PPS
Short Description:
Laser welding Natural, Black- Physical:
- Density: 1.46
- Bulk Density: /
- Mold Shrinkage (Machine Direction): 0.4
- Mold Shrinkage (Transverse Direction): 0.70
- Mold Shrinkage: /
- Melt Flow Rate (337℃. 6.6Kg):
- Melt Flow Rate (316℃. 5.0Kg):
- Melt Flow Rate:
- Melt Viscosity (380℃.77HZ): /
- Particle size (D50): /
- Water Absorption (24h @23°C): 0.02
- Flammability(1.6 mm): /
- Ash Content:
- Moisture Content:
- Volatile:
- Mechanical :
- Tensile Stress at Break (5 mm/min): 110
- Tensile Modulus at Break (1 mm/min): /
- Elongation at Break (23℃): 1.8
- Flexural Modulus at Break (23℃): 7.5
- Flexural Strength at Break (23℃): 190
- Notched Izod Impact Strength @23℃ (V-notched): 8
- Notched Izod Impact Strength @-30℃ (V-notched):
- Unnotched Izod Impact Strength @23℃:
- Rockwell hardness (23℃):
- Rockwell Hardness (M-Scale):
- Rockwell Hardness (R-Scale):
- Thermal :
- Melting Temperature (10°C/min): 280
- Melting Point: /
- Heat Deflection Temp. High Load (1.8 MPa): 240
- Tg（0°C/min）:
- Coeff. Of Linear Them. Expansion (parallel): 0.3
- Coeff. Of Linear Them. Expansion (normal): 0.5
- Flammability (0.3 mm): V-0
- Flammability (3.0 mm): V-0
- Glass Transition (Tg):
- Melt Flow Rate (380℃, 5kg):
- Thermal expansion coefficient (T<Tg) along flow:
- Thermal expansion coefficient (T>Tg) along flow:
- Thermal expansion coefficient (T<Tg) across flow:
- Thermal expansion coefficient (T>Tg) across flow:
- Thermal expansion coefficient (T<Tg):
- Thermal expansion coefficient (T>Tg):
- Thermal conductivity (23℃):
- Electrical Properties:
- Dielectric Strength (60*60*1mm³):
- Relative Permittivity (100Hz&1MHz):
- Dissipation Factor (100Hz&1MHz):
- Dielectric Strength: 25
- Relative Permittivity (4 GHz): 3.2
- Dissipation Factor (4 GHz): 0.002
- Volume Resistivity: 10^14
- Surface Resistivity: 10^14
- CTI: /
- CTI:
- Typical Processing Conditions:
- Drying Temp. / Time: 150℃&3h
- Injection Pressure: 30~100
- Injection Speed:
- Injection Molding Melt Temp.: 290~330
- Injection Molding Mold Temp.: 120~170
- Extrsuion/Blow Molding Melt Temp.:
- Temperature Settings:
- Hopper Temperature:
- Gate:
- Process Temperature:
