PEEK-SG301A87 is a 30% glass fiber reinforced PEEK compound developed to provide toughness, temperature, chemical resistant and higher strength.
Density | kg/m³ | ISO 1183 | 1510 |
Mold shrinkage(Machine Direction) | % | GB/T 15585 | 0.3 |
Mold shrinkage(Transverse Direction) | % | GB/T 15585 | 0.9 |
Water absorption (23°C-sat) | % | ISO 62 | 0.04 |
Tensile stress | MPa | ISO 527 | 180 |
Elongation at Break (at Break) | % | ISO 527 | 2.7 |
Flexural Modulus | GPa | ISO 178 | 11.3 |
Flexural Strength | MPa | ISO178 | 270 |
Charpy Impact Strength(V-notched) | kJ/m² | IS0 179 | 10 |
Melting temperature (10°C/min) | °C | ISO 11357 | 343 |
Heat Deflection Tem p High Load(1.8MPa) | °C | ISO 75 | 330 |
Flammability | class | UL-94 | V-0 |
Dielectric Strength | KV/mm | IEC 60243 | 25 |
Dielectric Constant |
|
IEC 60250 | 3.2 |
Dissipation Factor |
|
IEC 60250 | 0.005 |
Volume resistivity | Ω•cm | IEC 60093 | 1*10^16 |
CTI | V | IEC 60112 | 150 |
Drying |
|
|
150℃&3h/120℃&5h |
Injection Pressure | MPa |
|
|
Injection molding melt temperature | °C | ISO 294 |
360~385 |
Injection molding mold temperature | °C | ISO 294 |
180~200 |
Limit in-cylinder retention time |
|
|
|
Copyright © 2015. Copyright: Shandong New Materials Co., Ltd Saien Ji Lu ICP No. 05,003,105